Load it, aim safely and
fire. The Primer energy
ejects the cord attached
to the cleaning units with
cleaning and condition
oils. Pull it through,
instantly cleaning and
conditioning your
shotgun's bore.
DETAILED INSTRUCTIONS FOR USE

The Stinger Bore Cleaner has multiple stages of cleaning and each cartridge
has it's own cleaning and conditioning oils, ready to go anywhere and to use
when needed. Remember to use the Stinger in Lawful Areas Only. Using
the Stinger Bore Cleaner is quite simple. First, purchase the correct gauge.
Each Stinger is individually wrapped to protect it against the elements and
provide a stable shelf-life. Remove the wrapper from the cartridge prior to use.

Load the Stinger into the chamber. If you are using a double barrel, use only
one Stinger as it will easily clean both bores. For the second bore, you will
need to manually put the Stinger through. If you are using a pump or
semi-auto shotgun, the primer energy from the Stinger cartridge is not enough
to automatically eject the cartridge from the shotgun. You will, in all cases,
remove the empty cartridge manually...after you have pulled the
Stinger through the bore.

After you have loaded the Stinger, aim the shotgun in a safe direction. The
plastic overshot wad at the end of the cartridge will shatter when the primer
energy ejects the cord. Aiming in a safe direction, fire the Stinger. There is
a small bead at the end of the cord that causes the cord to eject out the end
of the barrel. This cord is connected to the multiple stages of cleaning units.

Pull the cord slowly. You will encounter designed resistance. Not all
manufactured shotguns have identical inside diameters on the bore. If you
encounter strong resistance you may need assistance pulling the cord.
Pulling with a glove on is effective. Pull the cord slowly...there will be less
resistance as the Stinger fully exits the cartridge. Pulling slowing permits the
cleaning and conditioning oils to work, along with the multiple stages of
cleaners. Each Stinger has enough oils (depending on the amount of residue
in the bore) to clean several bores. You can put the Stinger through the same
bore again, manually...to clean and condition the chamber area.

360° Of Cleaning Power is part of the technology that makes the Stinger so
effective. The cleaning units inside the cartridge are oversize and expand in
the bore. The cleaning and conditioning oils (by Mil-Comm Products) are the
finest available. The Stinger Bore Cleaner is designed to provide you with the
least amount of exposure to chemicals, clean and condition your bore with
non-toxic synthetic oils and permit you to achieve this almost anywhere and
anytime you desire.
QUICK
INSTRUCTIONS
NOTE:
If you have plastic
residue in the bore,
use a metal wire
brush to loosen the
plastic residue prior to
using the Stinger.
Using the Stinger is
fast and easy. One
Stinger can easily
clean multiple bores.
Make sure to dispose
of properly.